GNSS Simulator
Talk to an engineer
GNSS Simulator

GNSS Simulator vs GNSS Emulator: What’s the Difference?

GNSS Engineering · Terminology & Test Coverage GNSS Simulator vs GNSS Emulator: What Is the Difference? A GNSS simulator and a GNSS emulator can describe overlapping tools. The name alone does not tell you whether a product generates RF signals, supplies digital samples, models receiver measurements or substitutes position data at a software interface. For

GPS/GNSS Accuracy Explained: Typical Errors, Metrics, and How to Test It Properly

Positioning Performance & Receiver Validation GPS/GNSS Accuracy: What to Expect and How to Test It Standalone GPS/GNSS commonly provides meter-level horizontal positioning in favorable open-sky conditions. Suitable corrected systems can achieve much smaller errors, including centimeter-level results in appropriate RTK conditions. Buildings, reflections, poor geometry, correction problems and installation errors can substantially change those results.

GNSS Navigation Explained: How Satellite Positioning Works (PNT, Ranging & Trilateration)

GNSS Fundamentals GNSS Navigation Explained: How Satellite Positioning Works GNSS navigation works by receiving radio signals from satellites, measuring their apparent travel times, and combining those measurements with satellite orbit and clock information. The receiver calculates its own position, velocity and time; the satellites do not send each user a ready-made location. This guide follows

In-Depth Guide to GNSS/IMU Integrated Positioning: Principles, Algorithms, and Real-World Deployment

Navigation Engineering Guide GNSS/IMU Integrated Positioning: Sensor Fusion, Accuracy and Testing GNSS/IMU integrated positioning combines satellite navigation measurements with inertial motion measurements to estimate position, velocity and attitude. GNSS provides an external reference; the inertial navigation calculation propagates motion between updates and during temporary signal loss. For vehicle testing, robotics, surveying and navigation development, the

Global GNSS Systems Compared: Key Differences Between GPS, GLONASS, Galileo, BeiDou & Regional Constellations

Regional Signals · Augmentation · Receiver Testing Testing QZSS, NavIC and SBAS: A Receiver Validation Guide Start with the deployment region and the exact signals or services your receiver must support. Use controlled runs to verify QZSS and NavIC positioning, then test correction decoding and use separately for the augmentation services required by your application.

Scroll to Top